C540 is an Qualcomm Chipset high power industrial Ceiling Wireless Access Point with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), support Wave2, equipped Gigabit WAN & LAN port, data rate make more than 100 end users can access into C540.
C540 is an Qualcomm Chipset high power industrial Ceiling Wireless Access Point with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz (900Mbps), support Wave2, equipped Gigabit WAN & LAN port, data rate make more than 100 end users can access into C540 with faster Ethernet, make them to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office, shipping mall..
Main Features
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be 26±2dBm high power, 4dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply the stable Wi-Fi signal for users.
Wave 2 Technology
With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 160MHz Frequency, greatly to improved the communication efficiency.
Power over Ethernet
C540 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore.
Then work with Cloud Management System, easy to do central and remote management, advertisement and multiple captive portal authentication make this AP more professional in Wi-Fi Projects.
Hardware |
|||||
Chipset |
Qualcomm QCA9563 + QCA9886 +QCA8334 |
||||
Standard |
802.11ac/b/g/n, MIMO technology |
||||
Memory |
128MB DDR2 RAM |
||||
Flash |
16MB |
||||
Interface |
1 * 10/100 /1000Mbps RJ45 WAN Port |
||||
1 * 10/100 / 1000Mbps RJ45 LAN Port |
|||||
1 * Reset button, press 15 seconds to revert to default setting |
|||||
Antenna |
Build in 4dBi MIMO Antenna |
||||
Power consumption |
48V PoE<30W |
||||
Size |
198mm*198mm X 28mm |
||||
Weight |
0.5KG |
||||
RF Data |
|||||
Frequency |
2.4G:802.11b/g/n; 5GHz:802.11a/n/ac |
||||
2.4GHz, 5GHz |
|||||
Country code |
FCC, IC, ETSI, MKK, MKK1, MKK2, MKK3, NCC, RUSSIAN, CN |
||||
Modulation |
OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
||||
DSSS = DBPSK, DQPSK, CCK |
|||||
Throughput |
1200Mbps |
||||
2.4GHz RF Power |
802.11b |
11M |
24±2dBm |
1M |
26±2dBm |
802.11g |
54M |
23±2dBm |
6M |
25±2dBm |
|
802.11n HT20 |
MCS7 |
22±2dBm |
MCS0 |
24±2dBm |
|
802.11n HT40 |
MCS7 |
22±2dBm |
MCS0 |
24±2dBm |
|
5.8G RF Power |
802.11a |
54M |
21±2dBm |
6M |
24±2dBm |
802.11n HT20 |
MCS7 |
21±2dBm |
MCS0 |
24±2dBm |
|
802.11n HT40 |
MCS7 |
20±2dBm |
MCS0 |
23±2dBm |
|
802.11ac HT80 |
MCS9 |
19±2dBm |
MCS0 |
22±2dBm |
|
2.4G Receive Sensitivity |
802.11b |
11M |
-85dBm |
1M |
-94dBm |
802.11g |
54M |
-72dBm |
6M |
-90dBm |
|
802.11n HT20 |
MCS7 |
-70dBm |
MCS0 |
-88dBm |
|
802.11n HT40 |
MCS7 |
-68dBm |
MCS0 |
-86dBm |
|
5.8G Receive Sensitivity |
802.11a |
54M |
-72dBm |
6M |
-90dBm |
802.11n HT20 |
MCS7 |
-70dBm |
MCS0 . |
-88dBm |
|
802.11n HT40 |
MCS7 |
-68dBm |
MCS0 . |
-86dBm |
|
802.11ac HT80 |
MCS9 |
-58dBm |
MCS0 . |
-85dBm |
|
EVM |
2.4G: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB 5.8G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB |
||||
PPM |
±20ppm |
||||
Max Users |
128+ |
Firmware Features |
|
Operation mode |
Wireless AP, Gateway, WISP, Wi-Fi Repeater |
WAN Type |
Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
Wireless Security |
64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
SSID |
Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
Firewall |
DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter |
Protocols |
IPv4 |
Others |
|
Package Contents |
|
System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
Environment |
|
Management |
Firmware GUI , Remote Management, WLAN Controller, Cloud Management System |
Bu ürünle ilişkili bir ürün bulunmamaktadır .
Bu ürünle ilişkilendirilmiş herhangi bir Nasıl Yapılır dökümanı bulunmamaktadır .